top of page
HGT Precision 5 Speed Motorsport Dog Box Transmissions
Shifter 5-speed Image.png

GEARS

Straight Cut Strong and Diamond Ground to DIN5/DIN6 standards for maximum efficiency and even load distribution across the gear teeth. Constant-mesh dog engagement for shifts as quick as 40 milliseconds. Probably the worlds quietest straight cut geared, sequentially shifted, dog engaged gearbox, with almost none of the whine traditionally associated with this industry race standard. This sequential gearbox is totally streetable and generates less heat than competitors. Gears have been successfully tested behind engines with 1500hp/1100kw and 1200ftlb/1600nm in race conditions.

SEALS

O-Ring

WEIGH

34kg or 75lb

PORTS

Oil Outlet and Inlet for lines for Pump, Filter and Cooler options

Gearbox Breather

Oil Temperature sensor

Oil Fill

Oil Drain with a magnetic plug

RATINGS

1000 nm / 738 ftlb / 102kg and 11,000 RPM

LUBRICATION

Internal Splash

FRONT PATTERN

GM Muncie

SIZE

389mm Long - 180mm Wide - 277mm Tall

INPUT SHAFTS

  • GM               26 tooth spline

  • GM/Nissan   26 tooth spline with Nissan spigot

  • Mazda          23 tooth spline

  • Nissan          24 tooth spline

  • Toyota          21 tooth spline (R154)

  • Toyota          14 tooth spline (V160 / V161/ 6MT)

Others possible on request

OUTPUT

Flange pre-drilled for 1350 Series Yoke or Slip Yoke - supplied with hardware. Comes pre-fitted with a reluctor wheel ready to accept our Speed Sensor to enable launch control, traction control, speed referenced boost or a digital speedometer.

RATIO SELECTION
ADD ACCESSORIES

Thanks for submitting!

bottom of page